By Molytech Products Private Limited
Lubrication is important for keeping machines healthy and running smoothly. But small mistakes can lead to breakdowns, high repair costs, and shorter machine life. Here are the most common lubrication mistakes and easy ways to avoid them.
1. Using the Wrong Lubricant
Every machine needs a specific oil or grease. Using the wrong one can cause overheating and wear.
How to avoid it:
- Follow the machine manual
- Avoid mixing different lubricants
- Get product guidance from
Molytech Products Private Limited
2. Over-Lubrication
Too much grease can damage bearings.
How to avoid it:
- Use a calibrated grease gun
- Apply only the recommended amount
3. Under-Lubrication
Too little lubrication causes friction, noise, and heat.
How to avoid it:
- Follow a regular lubrication schedule
- Check machines often for noise or vibration
4. Contaminated Lubricants
Dust, water, and particles can make lubricants ineffective.
How to prevent contamination:
- Store lubricants in a clean, dry place
- Keep containers tightly closed
- Use clean tools during application
- Explore our range of lubricants here:
Industrial Maintenance Aerosols
5. Mixing Incompatible Lubricants
Mixing oils or greases can create sludge and damage machine parts.
How to avoid it:
- Never mix lubricants without checking compatibility
- Flush old lubricant before switching types
- Check our
Industrial Greases to choose the right one
6. Skipping Oil Analysis
Oil analysis helps detect early problems before they become major failures.
Oil analysis helps identify:
- Contamination
- Wear particles
- Low viscosity
- Water content
FAQs About Lubrication
Q1. How often should machines be lubricated?
It depends on the machine type, working hours, and load. Follow the manufacturer’s lubrication schedule.
Q2. Can I mix two different greases?
No. Mixing greases can cause chemical reactions and damage machine parts.
Q3. What happens if I over-lubricate a bearing?
It increases heat, damages seals, and shortens bearing life.
Q4. Why is oil analysis important?
It helps detect early signs of wear, contamination, and oil degradation.
Q5. Which lubricants are best for my machines?
You can explore all options here:
All Products – Molytech Lubes
Conclusion
By avoiding these lubrication mistakes, you can improve machine performance, reduce downtime, and save maintenance costs. For high-quality industrial lubricants and expert support, visit our Contact Page or explore our complete product range.